Anchor Pull Test Services
DOB-required anchor pull testing and certified load verification for New York City construction projects. Professional engineering documentation for code compliance, TR8 reporting, and project signoff.
What Is an Anchor Pull Test?
The Anchor Pull Test is a critical field verification procedure required by the NYC Department of Buildings for post-installed anchor installations. Under Chapter 17 of the NYC Building Code (referencing IBC Section 1704 and ACI 318), mechanical and adhesive anchors used in structural applications must demonstrate adequate capacity through in-situ testing before the installation can be approved as part of the special inspection process.
Our certified testing verifies that anchor bolts, post-installed fasteners, and industrial fixtures can safely support the specified design loads without failure or displacement. This verification is essential for DOB compliance and is typically documented as part of the TR8 testing record for the project. Common applications include scaffold anchors, sidewalk bridge supports, facade restoration anchoring systems, parapet securing anchors, and mechanical equipment supports.
Every test is conducted using calibrated equipment with documented load application protocols. Our certified reports include load-displacement data, pass/fail determinations referenced to design requirements, and professional engineering certification — providing the documentation required for DOB closeout and project signoff.
DOB-Certified Anchor Pull Testing Protocol
Our testing procedures follow NYC Building Code requirements and referenced ASTM standards to ensure accurate results, repeatable methodology, and documentation that satisfies DOB compliance requirements for TR8 testing records.
Pre-Test Review
Review of installation specifications, design requirements, and applicable codes.
Load Application
Controlled application of test loads to verify anchor performance under specified conditions.
Performance Monitoring
Careful observation for any signs of failure, movement, or inadequate performance.
Certified Reporting
Detailed documentation of test results with professional engineering certification.
Ensuring Structural Safety
Common Testing Applications
Schedule Your NYC Anchor Pull Test
Ensure your anchor installations meet NYC Building Code requirements with professional special inspection and certified testing services backed by over 28 years of NYC engineering experience.